Standard detector base for IQ8Quad


Standard IQ8 detector base for the series IQ8Quad. When removing the detector, the loop is automatically closed. The base features a protective function against detecotr removal, which can be used if required.
  • A lot of space for wire connection
  • Automatic closing of the loop bus wiring system for detector extraction
  • Detector extraction locking is enclosed in the base

Additional Information:

Cable entry on the side or through the bottom plate.
Wago clamps for looping in wires, e.g. type 243-204 (ø 0.5 mm - ø 1.0 mm) or 273-104 (0.75 mm² - 2.5 mm²) can be mounted on the detector base.
Connection terminalø 0.6 mm to 2 mm²
Application temperature-20 °C ... 72 °C
Colorwhite, similar to RAL 9010
Weight gapprox. 60 g
Storage temperature-25 °C ... 75 °C
Air humidity< 95 % (non-condensing)
Dimensionsø: 117 mm H: 24 mm (incl. detector 62 mm)

Promotional - Brochures

Brochure Ex Products 220 KB

Promotional - Product Data Sheets

Product data sheet IQ8Quad with integrated alarm devices Version: 01.2015 506 KB