Detector base with relay contact for IQ8Quad


IQ8Quad detector base with relay contact output. Contact: floating NO or NC contact selectable via jumper. Default setting: NO contact.
  • Provides a voltage-free contact controlled by the remote output of a detector
  • Draws negligible current
  • A lot of space for wire connection
  • Automatic closing of the loop bus wiring system for detector extraction
  • Detector extraction locking is enclosed in the base

Additional Information:
Cable entry on the side or through the bottom plate. Connection of remote indicators not allowed!

Wago clamps for looping in wires, e.g. type 243-204 (ø 0.5 mm - 1.0 mm) or 273-104 (0.75 mm²- 2.5 mm²) can be mounted on the detector base.

Not suitable for application with IQ8Quad with integrated alarm device Part No. 802383, 802384, 802385 and 802386 as well as 802385.SVxx and 802386.SVxx!
Connection terminal ø 0.6 mm to 2 mm²
Application temperature -20 °C ... 72 °C
Color white, similar to RAL 9010
Weight g approx. 80 g
Contact load relay 30 V DC/1 A
Storage temperature -25 °C ... 75 °C
Material ABS
Air humidity < 95 % (non-condensing)
Current consumption 5 µA (w/o detector, active relay)
Dimensions ø: 117 mm H: 24 mm (incl. detector 62 mm)