Field bus interface PLus


Interface for the programming of the FACP 8007, 8000 C/M, 8008, gateway, ABIGA and IQ8Control or for the direct field-side connection of a single installed analog loop. With the optional switched-mode power supply (Part No. BME2Z002), bus-supplied alarm signaling equipment can be tested independently from the control panel via the direct connection to the field bus interface (Part No. 789862.10). (V1.12 or above of programming software tools 8000 is required)
Additional Information:
Connecting cables (Part No. 789863 and 789864) are not included in delivery.

Windows NT does not support any USB interface. Therefore the use of the programming software tools 8000 is possible under Windows NT only with the usage of programming interface RS 232 (Part No. 769828).

Scope of Delivery:

One interface and two 6-pin plugs.
Colorwhite, similar to RAL 9010 / gray, similar to RAL 7035
Housingplastic, PS (Polystyrene)
Weight gapprox. 300 g
Storage temperature0 °C ... 50 °C
Type of protectionIP 40
Voltage supplyvia plug-in power supply (part no. BME2Z002) and/or via the USB connection
Ambient temperature5 °C ... 45 °C
DimensionsW: 68 mm H: 30 mm D: 135 mm
  • BME2Z002 Switched-mode power supply with cylindrical plug