Conventional MCP electronic module w/o snap-on function


Approval: VdS with blue housing 704901

Same as 804900, but without snap-on function.
Additional Information:
This electronic module is only approved as an electric stop push-button for gas extinguishing systems when combined with the blue housing (Part No. 704901). The electronic module Part No. 804902 with blue housing complies with the EN 12094-3 standard and therefore it can be used as an electric stop push-button for gas extinguishing systems in dry, non-hazardous branches.

In case the manual call point is used as a "house alarm" push-button, pre-printed labels are provided in the manual call point package.

Please note: for a LARGE MCP you have to order the electronic module and the MCP housing separately to have a complete MCP.

Alarm displayLED, red
Alarm current @ 9 V DCtyp. 9 mA
Connection terminalmax. 2.5 mm² (AWG 26-14)
Application temperature-20 °C ... 70 °C
Operating voltage8 ... 30 V DC
HousingPC ASA plastic
Weight gapprox. 236 g (with housing)
Storage temperature-30 °C ... 75 °C
No. of detector/zone10 detectors per zone (according to VdS)
Detector specificationEN 54-11, Type B
Air humidity< 95 % (non-condensing)
Type of protectionIP44 (in housing), IP55 (with accessory)
VdS classF
VdS-NrG 205114
DimensionsW: 133 mm H: 133 mm D: 36 mm